SPSI Tru Blue Super Concentrate Emulsion Remover - 5 Gallon
Highly concentrated screen printing emulsion remover formulated for efficient stencil removal during screen reclaiming, providing economical dilution, powerful cleaning performance, and dependable results for production screen rooms.
THIS PRODUCT SHIPS FROM OUR TX LOCATION ONLY
Characteristics
SPSI Tru Blue Super Concentrate Emulsion Remover is a concentrated screen reclaiming chemical designed to efficiently break down and remove screen printing emulsions from mesh after the ink has been removed. Its concentrated formulation provides an economical solution for reclaiming screens while allowing users to prepare working-strength solution as needed.
Designed for professional screen printing environments, Tru Blue Super Concentrate helps dissolve used stencil material so it can be removed with high-pressure water, preparing the mesh for additional reclaiming steps and eventual reuse. The concentrated format helps reduce chemical consumption and storage requirements compared with ready-to-use emulsion removers.
Tru Blue Super Concentrate is well suited for production screen rooms where screens are reclaimed regularly. When incorporated into a proper reclaiming process, it helps remove stencil residue efficiently while extending the usable life of screen printing frames and mesh.
For best results, ink should be completely removed from the screen before applying the emulsion remover. Apply the properly diluted solution to both sides of the wet screen, allow it sufficient contact time to attack the stencil, and thoroughly pressure wash the screen before continuing with haze removal, degreasing, or preparation for recoating.
- Super-concentrated emulsion and stencil remover
- Designed for professional screen printing screen reclaiming
- Breaks down used emulsion for removal from screen mesh
- Concentrated formula provides economical chemical usage
- Allows working-strength solution to be prepared as needed
- Helps reduce storage requirements compared with ready-to-use products
- Suitable for routine production screen reclaiming
- Works as part of a complete ink removal and screen reclaiming process
- Helps prepare mesh for cleaning, degreasing, and recoating
- Suitable for reusable screen printing frames and mesh
- Remove all ink from the screen before applying the emulsion remover.
- Dilute the concentrate according to the product directions for the intended reclaiming process.
- Wet the screen before applying the prepared emulsion remover solution.
- Apply the solution evenly to both sides of the screen for consistent stencil removal.
- Allow the remover adequate contact time to break down the emulsion, but do not allow the chemical to dry on the screen.
- Agitate the stencil with a suitable screen reclaiming brush when necessary.
- Thoroughly pressure wash both sides of the screen to remove dissolved emulsion and stencil residue.
- Follow with haze or stain removal when necessary before final degreasing.
- Completely rinse the screen before applying new emulsion.
- Always follow the product label, technical data sheet, and applicable safety instructions for dilution, handling, and use.